Door Seasonal Sale

A simple, round rosette in polished nickel is an elegant backdrop to many styles of door knobs. This low-profile design, which steps down slightly around the outside to create a subtle border, is re-cast from a circa 1920 antique original. Due to the screw hole positioning, it will not work on doors pre-drilled with a 2 1/8-inch bore.

With its cast brass construction and distinctive cut corners, this classic keyhole escutcheon is ideal for Colonial-Revival interiors. A great choice for restoration or vintage new construction, it comes in Antique Brass finish.

We don't often think of a door stop as a major design element, but this lovely floor-mounted model is an exception to the rule! The cap is embossed with a fluted pattern, so elegant and attractive you'll hate to hide it behind your door. Made of solid brass, with a durable black bumper, it comes with an elegant satin nickel finish.

This understated lever is one of our most versatile designs, suited for both rustic and refined interiors. This 2 1/2-inch version is ideal for use with narrow backset locks that are surface mounted typically used on French and screen doors. Made of heavy-duty cast iron, it features classic matte black finish, and the powder-coating is rust resistant for long-lasting wear.

These large round knobs have a heft and substance typical of Craftsman style hardware. Cast from solid brass, they're both durable and attractive. A lacquered, oil-rubbed bronze finish completes the classic Craftsman look.

P. & F. Corbin featured this stately pocket door pull in their 1905 hardware catalog. The Mantua pattern, as it was called, features a lavish array of neo-classical ornament and is suited to formal interiors of any era. True to the original, our exclusive pull is reproduced in stamped sheet brass with an un-lacquered finish.

The classic and versatile ball tip butt hinge has been a favorite since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of solid extruded brass for high strength. The polished nickel finish is stylish and durable.

Charming and decorative, our Rectangular Ornate Keyhole Cover is a popular choice for restoration or vintage new construction. Made of cast-iron, it features a lively scroll pattern and comes in an Antique Iron finish.

This decorative door bell reveals the eclectic side of Victorian design. The exuberant mix of Eastlake, Baroque and Neo-Grec elements makes it a wonderful choice for most any late 19th century home. Cast in solid brass with a traditional polished finish.

Spring butt door hinges are typically used on interior garage doors or anywhere a self-closing door is required. This radius corners UL listed hinge is suitable for right or left hand installation and features easily adjusted spring tension. Made of heavy duty steel with an attractive antique brass finish.

These lustrous black porcelain knobs are a stately companion to any Victorian iron rim lock. The solid Iron base is offered in antique iron. Each knob set has one long shank and one short shank with a flange.

Plain and fancy blend together in this Victorian door bell. The smooth dome is mounted to a nicely decorated backplate, making this a great choice for many styles of home. Finely cast from solid brass and finished in a rich oil-rubbed bronze, it produces a hearty ring when turned.

Our 3-Inch Arts and Crafts Ball-Tipped Door Hinge captures the true spirit of Craftsman design. Made of durable cast brass, it features a rugged, hammered surface. A velvety oiled bronze finish, with subtle copper highlights, completes the vintage effect.

These lustrous black porcelain knobs are a stately companion to any Victorian iron rim lock. With their small diameter, these knobs are ideal for use with narrow backset rim locks typically used on French and screen doors. The matte black powder-coated shanks are rust resistant for long-lasting wear.

Whether your home is rustic, contemporary or somewhere in between, our ruggedly simple Steel Butt Door Hinge (4-Inch) is a great choice. The surface is black phosphate treated then lacquered, for rust-resistant, long-lasting wear. With removable, stainless-steel pins, it is ready for interior or exterior use.

In the 19th century, plain rosettes such as these were paired with porcelain knobs on doors with rim or mortise type locks. Small and understated, they are again a popular choice for restoration or vintage new construction. Hand-finished with our living antique patina.

Rough textured surfaces and a coil-like handle give this sturdy iron bolt an authentic colonial flavor. This common 9 3/4" size comes with three included strike options, and is versatile to work throughout your home and garden.

This small Eastlake style rosette is reproduced from a circa 1880s original. The stunning star design is captured in heavy-duty cast brass, with a polished and lacquered finish. Not for use on modern pre-drilled doors.

Complete your romantic look with this matte black finish dummy strap. Use alone or combine with standard butt hinges to simulate a working strap hinge. Made of cast aluminum for rust resistance. Strap measures 17 3/8-inch long by 2 3/4-inch wide at the fleur-de-lis.

This highly decorative 2 1/2-Inch Steeple-Tip Hinge is a Victorian-era classic. With its graceful tendrils, patterned barrel and elegant finials, it is a delightful addition to your home. Made of heavy-duty cast iron, this faithful reproduction has loose pins and slotted and Phillips screws. Matte black pwder coating.

Jet black porcelain knobs are a Victorian era classic. Paired with small rosettes or back plates, they make a stately, yet understated period style door set. The durable glazed knobs are firmly fastened to a solid brass shank with a polished and lacquered finish.

Charming and decorative, this rectangular keyhole cover is a popular choice for restoration or vintage new construction. Made of cast iron, it features a lively scroll pattern and distinctive cut corners. Reproduced from an antique original, it comes in a matte black finish.

This classic 4-inch ball tip door hinge has been a favorite since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, and heavy duty 1/8-inch thick leaves - just like the originals. Made of solid cast iron finished with a versatile matte black powder coat it includes both slotted and Phillips wood screws.

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 18 TPI. Used with privacy latches and mortise locks with larger hubs, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features two 3/8-inch solid centers and a standard 9/32-inch thickness.